Balboa Heater - Pre M7 - PSI Switch - 2.0kW
Works with M3/Lite Leader Spa Packs
A very common hot tub heater assembly for the M3/Lite Leader Spa Packs. Pre M7 Sensor style
Fitted with a 2.0PSI Pressure Switch for sensing water flow.
Heater gaskets and split nut unions are also included making for easy installation and removal. Solvent weld sockets for 2.0" pipe. Fixed into place with 2 x metal straps
Found in:
Agean Spas, Catalina Spas, Canadian Spas, Hydropool Spas, Marquis Spas & Spaform (SF100 ), M3 TUV, Lite Leader
Top Tip:
Always use an appropriate spanner or long nose pliers to hold the terminal base before tightening or loosening the 10mm terminal nuts.
| Type | Flow Thru |
| MPN | 50139 |
| Element | Incoloy |
| Integrated in Spa Pack | No |
| Sensor Type(s) | Pressure Switch - Flow |
| Mount Type | Band |
| Length (includes tails) | 495.3 mm |
| Plumbing Connection | 2.0'' |
| Power | 2.0 kW |
| Voltage / Hz | 230V - 50/60Hz |
| Amps | 8.0-8.5 |
| Element Type | Incoloy |
| Element Length | 10" (255mm) |
| Terminal Spacing | 31.75 mm |
| Compatible Spa Pack | Balboa GS/GL Metal Box, Other |
| Amp | 8.0/8.5 A |
| Supply V/Hz | 230V / 50Hz |
| Min Flow | Determined by PSI switch |
Important
Information:
Our range of Spa Packs must be installed by a competent individual
or tradesman, that is trained within the industry. Spa Packs and other
computerised equipment are exempt from our returns policy if they have been
opened or installed. If the spa pack is suspected as being
faulty, it will need to be returned to us within the warranty period and will
then be forwarded to the manufacturer for inspection. If deemed to be faulty,
we will replace under warranty. If the board is not at fault or is found to
have been damaged due to installation, an additional charge will be required to
cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If
you are unsure, please contact our friendly customer service team for advise
& support
