Balboa Temperature & Hi-limit Sensors
Pre M7 Spa Packs
Balboa - Temperature & Hi-limit Sensors Pre M7 Spa Packs
This kit contains two Balboa sensors that use the same socket: one for temperature and one for overheating protection (called "Hi-Limit").
Balboa temp and hi-limit assembly is for the older M1, M2 & M3 heaters that use PSI sensors.
Used in Balboa spa packs such as the M3TUV, Lite Leader and 2000 Value series including 2005LE, the large sensor measures water temperature from a thermowell situated in your hot tubs wall. While the smaller sensor is the hi-limit shut off sensor which fits the small panel on the heater.
Very common on older spas, with the older style metal boxed Balboa controls such as the M1, M2 & M3 systems.
Used by many spa brands over the years such as Spaform, Canadian Spa, Hydropool, Hydrospa, Leisurerite, Catalina & many many more.
Dimensions
- Temperature Sensor Diameter: 9.5 mm
- Temperature Sensor Length : 240 cm
- Hi-Limit Sensor Diameter: 6.5 mm
- Hi-Limit Sensor Length : 80 mm
Part Number
- Balboa: 30337
Important Information:
Our ranges must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
