Balboa Temperature Sensor
For M7 Spa Packs
Balboa Temperature Sensor - M7 Spa Packs
Balboa M7 Temperature Sensor quite un-common and is usually only found on early Balboa metal box Value M7 and LE M7 spa packs that have an individual temperature sensor with two pins, note the black M7 style pin connector.
This sensor probe is housed in a thermowell in the spa shell or pipe work to read the actual water temperature.
Dimensions
- Diameter of Probe: 9.5 mm
- Length of Probe: 50 mm
- Length of Cable: approx. 240 cm
- Plug: 2 wires (black, red), 2 pins
Part Number
- Balboa: 30352
Important Information:
Our ranges must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
